Length match
Confirm that the installed loop calls for a 4 m extension cable and that the probe lead completes the intended total system length.
Item NO.:
21747-040-00Order(MOQ):
1Goods Stock:
17Payment:
T/TLead Time：
In stockWeight:
0.15KGDimension:
19x19x2cmDescription:
4 m Unarmored Extension CablePrice:
AskA 4 m unarmored extension cable for a matched legacy Bently Nevada 7200 Series 5 mm or 8 mm proximity transducer chain.
Bently Nevada 21747-040-00 is a legacy 7200 Series extension cable. The 040 code identifies a 4 m cable, while 00 identifies the version without stainless-steel armor.
It belongs between the compatible 7200 probe and Proximitor sensor. Because older 7200 installations can contain several probe, extension-cable and system-length combinations, the safest maintenance decision is based on the complete labels from all three components.
Confirm that the installed loop calls for a 4 m extension cable and that the probe lead completes the intended total system length.
Keep the replacement within the correct 7200 5 mm or 8 mm measurement chain shown by the installed labels.
The 00 option is unarmored, so the cable route must provide the mechanical protection needed by the application.
Photograph the probe, extension-cable and Proximitor labels before disconnecting the existing channel.
Check mating connectors for contamination, looseness or damage and preserve the original routing and bend practice.
After replacement, compare the signal with the plant baseline and commissioning procedure for the complete loop.
| Product family | Legacy 7200 Series proximity transducer system |
|---|---|
| Component role | Probe-to-Proximitor extension cable |
| Cable length | 4 m (157 in) |
| Cable protection | Without stainless-steel armor |
| Selection basis | Matched probe, cable and Proximitor system labels |
| Documentation status | Legacy manufacturer datasheet archive |
| Place of shipment | Xiamen, China |
| Delivery Time | 1-3 days |
| Quantity | 100% New Original |
| Minimum Order Quantity | 1pc |
Used when maintaining an existing 7200 Series proximity channel whose installed signal chain already specifies a 4 m unarmored extension cable. Typical projects include planned spares and cable replacement on legacy turbine, compressor and pump monitoring systems.
Only if the complete probe, cable and Proximitor combination still produces the intended electrical system length. A different cable length should not be treated as a direct swap.
It is the unarmored version. A protected route or a correctly specified armored alternative should be considered when the installation needs added mechanical protection.
No. Confirm the 7200 family, cable length, probe lead and Proximitor system length from the labels because similar connectors can appear on different legacy combinations.
Inspect both connections, confirm the total electrical length and evaluate the probe and Proximitor sensor with the cable as one measurement chain.
No. It should be sourced for the supported legacy 7200 installation shown by the existing component labels, not used as a general cross-family cable.
Send the cable label, probe and Proximitor labels, connector photos, installed route, quantity, delivery country and maintenance deadline.
Labels and installed context are compared before quotation.
Commercial terms and available traceability are confirmed with the offer.
Availability and delivery options are coordinated around your shutdown plan.
Coverage begins on the shipment date unless the confirmed quotation states otherwise.
Coverage and available remedy follow the confirmed quotation and sales agreement.
We carefully review technical documents to match your exact hardware version. Send us a clear photo of the complete product label and tell us whether you need a datasheet, user manual or wiring diagram.
|
330104-00-16-10-02-00 |
330104-05-13-10-02-00 |
330130-045-00-05 |
|
330104-00-16-10-02-CN |
330104-05-15-05-02-00 |
330130-045-01-00 |
|
330104-00-18-10-02-00 |
330104-06-12-10-02-00 |
330130-045-02-05 |
|
330104-00-20-05-02-00 |
330104-06-14-50-02-00 |
330130-045-03-05 |
|
330104-00-20-10-02-00 |
330104-10-18-10-01-00 |
330130-070-00-00 |
|
330104-00-22-10-02-00 |
330104-10-20-05-02-00 |
330130-075-00-00 |
|
330104-00-22-10-02-05 |
330104-10-20-10-02-05 |
330130-075-00-05 |
|
330104-00-24-10-02-00 |
330104-12-20-10-01-00 |
330130-080-00-00 |
|
330104-00-25-10-02-00 |
330104-13-20-10-02-00 |
330130-080-00-05 |
|
330104-00-25-10-02-05 |
330104-15-23-10-02-00 |
330130-080-01-00 |
|
330104-01-05-10-02-00 |
330104-19-25-10-11-05 |
330130-045-00-CN |
|
330104-01-06-10-02-00 |
330105-02-12-05-02-00 |
330130-080-00-CN |
|
330104-03-06-05-02-00 |
330105-02-12-05-02-05 |
330130-045-01-CN |
|
330104-03-06-10-02-00 |
330105-02-12-05-02-CN |
330130-075-00-CN |
|
330104-05-10-10-02-05 |
330105-02-12-10-02-00 |
330130-070-00-CN |
Related Tags :
SALES SUPPORT
32D floor,Guomao building,Hubin South Road,Siming District,Xiamen,Fujian,China.
Apter Power sells new and surplus products and develops channels for purchasing such products. This website has not been approved or recognized by any of the listed manufacturers or trademarks.
Apter Power is not an authorized distributor, dealer, or representative of the products displayed on this website. All product names, trademarks, brands, and logos used on this website are the property of their respective owners. The description, explanation, or sale of products with these names, trademarks, brands, and logos is for identification purposes only and is not intended to indicate any association with or authorization from any rights holder.
