Item NO.:
177230-01-01-CNOrder(MOQ):
1Goods Stock:
16Payment:
T/TLead Time：
In stockWeight:
0.12KGDimension:
6.8x2.7x2.4cmDescription:
SEISMIC TRANSMITTERPrice:
AskA loop-powered 4-20 mA seismic transmitter scaled for 0-25.4 mm/s RMS over 10 Hz to 1 kHz, with a secondary dynamic acceleration output and the China approval option.
For direct integration with plant control infrastructure, 177230-01-01-CN converts machine vibration into an industry-standard 4-20 mA loop signal. It can interface with PLC, DCS and SCADA inputs while also providing a secondary dynamic acceleration signal for analysis.
The configured velocity channel of 177230-01-01-CN covers 0 to 25.4 mm/s with a 10 Hz to 1 kHz RMS response. A 4 mA loop value represents zero velocity and 20 mA represents the configured full-scale range, giving the control system a clear scaling basis.
Mechanical installation of 177230-01-01-CN uses a compact 316L stainless-steel housing, a 3-pin MIL-C-5015 connector and one of the supplied mounting-thread adapters. The CN suffix selects the China country-specific option, with NEPSI/CCC requirements and applicable hazardous-area markings defined by the current approval guide.
Pin B is both the 4-20 mA loop return and the dynamic-signal reference. Grounding that dynamic reference can short the loop and produce no output, so isolation at Pin B is the first wiring condition to resolve.
Use a 4-20 mA input supplied from 12 to 30 Vdc and scale 4 mA to zero velocity and 20 mA to 25.4 mm/s. This keeps the receiving channel aligned with the configured 01 measurement range.
Pin C provides an unbuffered dynamic acceleration signal referenced to Pin B. It supports waveform verification and analysis while the main loop continues to carry the RMS velocity value.
A magnetic base can be used, but Bently Nevada advises rolling it onto the machine. Snapping it into place can create a large spike signal that may damage the electronics.
The published settling time is less than 15 seconds to within 2% of the final value. Commissioning logic should allow that interval before treating an early reading as a process or sensor fault.
The suffix selects the China country-specific option and the guide associates it with NEPSI/CCC requirements as applicable. Final acceptance should use the delivered markings and certificate package for the actual area classification rather than the suffix alone.
The supplied product is covered for 12 months under ApterPLC's sales terms. Keep the complete nameplate, original packaging and transaction record available if warranty support is required.
|
9200-06-02-10-00 |
128031-01C |
330101-00-08-10-02-00 |
|
330854-080-25-00 |
991-06-70-01-00 |
330101-00-08-20-02-05 |
|
10026-02-12-05-02 |
VELOMITOR 330500 |
330101-00-12-10-02-05 |
|
10030-05-30-05-02 |
130944-01 128275-01F |
330101-00-15-10-02-00 |
|
330104-00-12-10-02-05 |
330103-11-19-10-02-00 |
330101-00-16-10-02-00 |
|
330104-00-12-10-02-00 |
330103-00-07-10-02-00 |
330101-00-18-10-02-05 |
|
330104-00-14-05-02-00 |
330103-00-07-20-02-00 |
330101-00-19-10-02-00 |
|
330104-00-16-05-02-00 |
330103-00-08-05-02-00 |
330101-00-28-05-02-00 |
|
330104-00-17-05-02-00 |
330104-00-15-05-02-00 |
330101-00-30-10-02-05 |
|
330104-00-18-10-02-05 |
330103-00-08-10-02-00 |
330101-00-40-10-02-00 |
|
330103-12-25-10-01-00 |
330103-00-08-10-02-05 |
330101-00-50-10-02-00 |
|
330104-12-20-10-01-00 |
330103-00-09-10-02-00 |
330101-00-56-10-02-00 |
|
330104-00-24-05-02-00 |
330104-00-08-05-02-00 |
330101-00-60-10-02-00 |
|
330104-00-24-10-02-00 |
330103-00-08-05-02-CN |
330101-00-63-10-02-00 |
|
330703-000-050-10-02-05 |
330851-04-000-020-10-01-00 |
330101-00-12-10-01-CN |
Related Tags :
SALES SUPPORT
32D floor,Guomao building,Hubin South Road,Siming District,Xiamen,Fujian,China.
Apter Power sells new and surplus products and develops channels for purchasing such products. This website has not been approved or recognized by any of the listed manufacturers or trademarks.
Apter Power is not an authorized distributor, dealer, or representative of the products displayed on this website. All product names, trademarks, brands, and logos used on this website are the property of their respective owners. The description, explanation, or sale of products with these names, trademarks, brands, and logos is for identification purposes only and is not intended to indicate any association with or authorization from any rights holder.
