Armored interconnect cable
Item NO.:
16710-32Order(MOQ):
1Goods Stock:
23Payment:
T/TLead Time：
In stockWeight:
1.9KGDimension:
44x33x8.8cmDescription:
ARMORED INTERCONNECT CABLEPrice:
Ask
A 32 ft armored interconnect cable for wiring a Bently Nevada 330400 or 330425 accelerometer to an appropriate supported monitoring system using its specified terminal wiring.
Bently Nevada 16710-32 belongs to the 330400 and 330425 Accelerometer accessories. A 32 ft armored interconnect cable for wiring a Bently Nevada 330400 or 330425 accelerometer to an appropriate supported monitoring system using its specified terminal wiring.
Armored interconnect cable
Cable length in feet
| Product family | 330400 and 330425 Accelerometer accessories |
|---|---|
| Cable type | Armored interconnect cable |
| Cable length | 32 ft (9.75 m) |
| Length category | Non-standard/custom length |
| Conductors | 3-conductor shielded cable |
| Conductor size | 0.5 mm² (22 AWG) |
| Armor | Stainless steel over shielded cable |
| Accelerometer end | 3-socket female connector |
| Monitor end | Terminal lugs |
| Ordering increment | 1 ft |
| Published armored length range | 3 to 99 ft |
| Current backend stock | 23 |
| Current backend weight | 1.9KG |
| Current backend dimensions | 44x33x8.8cm |
| Place of shipment | Xiamen, China |
| Delivery Time | 1-3 days |
| Quantity | 100% New Original |
| Minimum Order Quantity | 1pc |
Identify the installed accelerometer and its 3-socket connection before disconnection.
Match the 32 ft custom length, armored construction and terminal-lug end.
Use the monitoring system’s specified terminal wiring and connector arrangement.
Include every order-code segment, manufacturer nameplate and approval marking.
Show the connected probe, cable, sensor, transmitter, rack module and receiving input as applicable.
Current backend stock, packed weight and dimensions remain unchanged until new warehouse evidence is supplied.
Match the installed 330400 or 330425 accelerometer, the 3-socket connector, terminal-lug end and the required 32 ft route. The family number alone is not enough when the length or termination differs.
Bently Nevada defines XX in the 16710-XX ordering structure as cable length in feet, so this execution is 32 ft (approximately 9.75 m).
The published 16710 construction uses a 3-socket female connector at the accelerometer end and terminal lugs at the monitor end. Compare both ends with the installed wiring before removal.
We recommend against treating them as interchangeable. Bently Nevada lists 16710 as the armored cable and 16925 as the unarmored cable, so construction and routing protection must remain part of the selection.
Start with connector seating, terminal wiring and cable continuity. The accelerometer manual identifies a disconnected or loose cable, connection to the wrong monitor or monitor terminals, and miswiring as possible fault sources.
Complete-label comparison before quotation.
Support for maintenance and project spares.
Quotation, delivery and after-sales communication.
Coverage begins on the shipment date unless the confirmed quotation states otherwise. Scope and available remedy follow the confirmed quotation and sales agreement.
Keep the product label and complete order reference.
Add connector or terminal photos and associated signal-chain labels.
Describe the observed symptom and operating context clearly.
Share a clear product label and the document type you need. ApterPLC will compare the request with the available manufacturer material and help identify the most relevant file.
Email: sales1@apterpower.comWhatsApp: +8618020776782Related Tags :
SALES SUPPORT
32D floor,Guomao building,Hubin South Road,Siming District,Xiamen,Fujian,China.
Apter Power sells new and surplus products and develops channels for purchasing such products. This website has not been approved or recognized by any of the listed manufacturers or trademarks.
Apter Power is not an authorized distributor, dealer, or representative of the products displayed on this website. All product names, trademarks, brands, and logos used on this website are the property of their respective owners. The description, explanation, or sale of products with these names, trademarks, brands, and logos is for identification purposes only and is not intended to indicate any association with or authorization from any rights holder.
